Agentic AI
Prompt Engineering vs Context Engineering: What's the Difference and Which Should You Learn?
Prompt engineering vs context engineering explained: definitions from Anthropic and LangChain, a side-by-side table, worked examples, techniques and what to learn first.
Short answer: Prompt engineering is writing and organising the instructions you give a model. Context engineering is deciding everything the model sees at each step (instructions, examples, retrieved documents, tool definitions, conversation history and memory) and keeping that set small and relevant as an application or agent runs. Prompt engineering is one part of context engineering. For a single chatbot reply, a good prompt is often enough; for RAG systems and agents that run many steps, context engineering is what makes them reliable. Learn prompting first, then context engineering.
Where the two terms come from
"Prompt engineering" became a common term once people started building on large language models. OpenAI's guide defines it as "the process of writing effective instructions for a model, such that it consistently generates content that meets your requirements" (OpenAI, Prompt engineering).
"Context engineering" became popular in 2025 as more teams built agents. Two widely shared definitions:
- LangChain (June 2025): "Context engineering is building dynamic systems to provide the right information and tools in the right format such that the LLM can plausibly accomplish the task." The same post argues that "prompt engineering is a subset of context engineering" (LangChain, The rise of context engineering).
- Anthropic (September 2025): "At Anthropic, we view context engineering as the natural progression of prompt engineering." Prompt engineering "refers to methods for writing and organizing LLM instructions for optimal outcomes", while context engineering "refers to the set of strategies for curating and maintaining the optimal set of tokens (information) during LLM inference" (Anthropic, Effective context engineering for AI agents).
Both say the same thing in different words: the prompt matters, but so does everything else in the context window.
Prompt engineering vs context engineering: side by side
| Prompt engineering | Context engineering | |
|---|---|---|
| Main question | "How do I phrase the instructions?" | "What should the model see right now, and what should it leave out?" |
| Scope | System prompt, task instructions, examples, output format | Prompt plus retrieved documents, tool definitions, conversation history, memory, outputs of earlier steps |
| Typical unit of work | One prompt, refined and tested | A pipeline that assembles context every turn |
| When it changes | When you edit the prompt | Every step, as tools return results and the conversation grows |
| Typical techniques | Clear instructions, few-shot examples, role and format, structured output, prompt chaining | Retrieval (RAG), tool design, history trimming, summarisation (compaction), external notes/memory, sub-agents |
| Typical failure | Vague or contradictory instructions | Missing facts, irrelevant or stale context, too many tools, overflowing history |
| Who does it | Anyone using an LLM, from analysts to engineers | Engineers building LLM applications, RAG systems and agents |
Why context engineering matters more as you build agents
A single question-and-answer call has a short, fixed context. An agent is different: it calls a tool, gets a result, decides the next step, calls another tool, and every result lands back in the context window. Anthropic describes context engineering as "iterative", with curation happening "each time we decide what to pass to the model".
Two research findings explain why "just add everything" fails:
- Position matters. In the "Lost in the Middle" study, "performance is often highest when relevant information occurs at the beginning or end of the input context, and significantly degrades when models must access relevant information in the middle of long contexts" (Liu et al., arXiv:2307.03172).
- Length matters. Chroma's July 2025 "Context Rot" report evaluated 18 models and found that "models do not use their context uniformly; instead, their performance grows increasingly unreliable as input length grows" (Chroma, Context Rot).
Anthropic sums up the goal as "finding the smallest possible set of high-signal tokens that maximize the likelihood of some desired outcome." A bigger context window is a bigger budget, not a reason to stop curating.
A worked example: the same task, two approaches
Task: an internal assistant that answers employee questions about leave policy.
Prompt-engineering-only version. You write a careful system prompt: role, tone, "answer in three bullet points", "if unsure, say you don't know", and two example answers. Then you paste the entire 80-page HR handbook below it. It works in the demo. In production, answers to questions about rules buried in the middle of the handbook become unreliable, every call is slow and costly, and when the handbook changes someone has to update the prompt by hand.
Context-engineering version. You keep the same well-written system prompt, but now each request is assembled:
- Instructions: the short system prompt (role, rules, output format).
- Retrieved knowledge: only the 2–4 handbook sections that match the question, with section ids for citations (see how to build a RAG pipeline).
- User facts: the employee's location and leave type from the HR system, fetched through a tool, not guessed.
- History: the last few turns, with older turns summarised.
- Tools: two clearly named tools (`get_leave_balance`, `create_leave_request`), with the second requiring human confirmation.
The prompt didn't get cleverer. The system around it decided what the model should see.
Core prompt engineering techniques (still essential)
Context engineering doesn't replace prompting; it builds on it. These basics, covered in the OpenAI guide, Anthropic's prompt engineering docs and the community Prompt Engineering Guide, are worth practising until they're automatic:
- Be clear and specific. State the task, audience, constraints and what "done" looks like.
- Give examples (few-shot). OpenAI describes few-shot learning as steering a model "toward a new task by including a handful of input/output examples in the prompt".
- Separate instructions from data. Use clear delimiters or tags so the model can tell your rules from the user's text.
- Ask for structured output. Request JSON that matches a schema, then validate it in code.
- Break big tasks into steps (prompt chaining) instead of one giant prompt.
- Test, don't guess. Anthropic's docs assume you already have "a clear definition of the success criteria" and "some ways to empirically test against those criteria" before you start prompt engineering. OpenAI also recommends pinning production apps to specific model snapshots and building evals, because different model versions can respond differently to the same prompt.
Core context engineering techniques
These are the levers you add once your application has knowledge, tools or multiple steps.
1. Write system prompts at the "right altitude"
Anthropic warns against two extremes: hard-coding brittle logic into prompts, and instructions so vague the model has nothing concrete to follow. It also advises against stuffing "a laundry list of edge cases" into a prompt; a few well-chosen examples work better.
2. Retrieve instead of pasting
Use retrieval to bring in only the passages relevant to the current question, with source ids for citations. If you are deciding between retrieval and training, read RAG vs fine-tuning.
3. Design a small, unambiguous tool set
Tool names, descriptions and outputs are context too. Anthropic names "bloated tool sets" as a common failure and gives a simple test: "If a human engineer can't definitively say which tool should be used in a given situation, an AI agent can't be expected to do better." The Model Context Protocol (MCP) standardises how tools are exposed; our how to build an MCP server guide walks through one.
4. Load context "just in time"
Rather than loading everything up front, Anthropic describes agents that keep "lightweight identifiers (file paths, stored queries, web links, etc.)" and load the data only when they need it.
5. Manage long-running history
For long tasks, Anthropic describes three techniques: compaction (summarising a conversation near the context limit and continuing from the summary), structured note-taking (the agent writes notes to memory outside the context window and reads them back later) and sub-agent architectures (specialised sub-agents work with clean context windows and return condensed results).
6. Treat everything in context as a security surface
Retrieved documents, web pages and tool outputs can carry instructions aimed at the model. The OWASP Top 10 for LLM Applications 2025 lists LLM01 Prompt Injection first and also includes LLM07 System Prompt Leakage. Keep secrets out of prompts, give tools least privilege, and require human approval for irreversible actions.
7. Measure it
Keep a fixed test set and track accuracy, cost and latency whenever you change what goes into the context. Context engineering without evaluation is just guessing with more tokens.
Common mistakes
- Treating a long context window as a dumping ground. More tokens cost more and can make answers worse.
- Endless prompt tweaking when the real problem is missing information. If the model doesn't have the fact, no wording will fix it.
- Too many overlapping tools. The model picks the wrong one, or none.
- Never trimming history. Old, irrelevant turns crowd out what matters now.
- Skipping evaluation. You can't tell whether a change helped.
Which should you learn first?
Learn prompt engineering first. It's quick to start, you need it at every level, and it teaches you how models respond to instructions and examples. Then move to context engineering as soon as you build anything with retrieval, tools or multiple steps; that's where most real-world reliability problems live.
| Your goal | Focus |
|---|---|
| Use AI tools better in your daily work | Prompt engineering basics |
| Build a chatbot over company documents | Prompting + retrieval (RAG) and citations |
| Build agents that use tools and run many steps | Full context engineering: tools, memory, compaction, evaluation |
| Lead or scope AI projects | Enough of both to judge what's realistic and how to test it |
Our agentic AI roadmap places both in a full learning path: prompting and structured output in stage 2, then tools, retrieval, memory and evaluation in later stages. If agents are new to you, start with what is agentic AI.
Learn both with hands-on projects
- The Applied Agentic AI Certification starts with LLM foundations, including context window limits and hallucination causes, then prompt engineering and structured output, production RAG and tool-using agents with memory, with a project in every module. No prior AI experience is required.
- The Generative AI & Agentic AI Engineer program covers prompt engineering and structured outputs in its foundations phase, then RAG systems, tool use with MCP, and memory, human-in-the-loop and agent evaluation.
- Teams that want a shared approach to prompting and context design can book a private cohort through corporate training.
Browse more free articles on the Datamarcos guides hub.
FAQ
What is the difference between prompt engineering and context engineering?
Prompt engineering is writing and organising the instructions you give a model. Context engineering is managing everything the model sees at each step, including instructions, examples, retrieved documents, tool definitions, history and memory. Prompt engineering is one part of context engineering.
Is context engineering replacing prompt engineering?
No. Clear instructions and good examples are still needed. Anthropic calls context engineering "the natural progression of prompt engineering": as applications add retrieval, tools and multiple steps, deciding what goes into the context becomes as important as how the prompt is worded.
What is an example of context engineering?
A support assistant that, for each question, retrieves only the two or three relevant policy sections, fetches the customer's account details through a tool, keeps a short summary of earlier turns and exposes a small set of clearly named tools, instead of pasting the whole policy manual into one long prompt.
What are the main context engineering techniques?
Retrieval (RAG) instead of pasting whole documents, a small and unambiguous tool set, just-in-time loading of data, summarising or compacting long histories, saving notes to external memory, splitting work across sub-agents, and evaluating every change on a fixed test set.
Do bigger context windows make context engineering unnecessary?
No. Research such as "Lost in the Middle" and Chroma's "Context Rot" report found that models use long contexts unevenly and can become less reliable as input grows. Longer contexts also cost more and run slower, so curating what goes in still matters.
Should I learn prompt engineering or context engineering first?
Start with prompt engineering: clear instructions, examples, structured output and testing. Move to context engineering when you build applications with retrieval, tools or multi-step agents.
Is context engineering only for developers?
Building the systems that assemble context is engineering work. But the core idea, giving a model only the relevant information in a clear format, helps anyone who uses AI tools, and product managers need it to scope AI features realistically.
Related program
Applied Agentic AI Certification
8 weeks, live and mentor-led: a project in every module, from LLM foundations and production RAG to multi-agent systems and MCP, ending in an integrated capstone.
Sources
Accessed 17 November 2026.
- Anthropic, "Effective context engineering for AI agents" (29 Sep 2025)
- LangChain, "The rise of context engineering" (23 Jun 2025)
- OpenAI, Prompt engineering guide
- Anthropic (Claude docs), Prompt engineering overview
- Prompt Engineering Guide (DAIR.AI)
- Liu et al., "Lost in the Middle: How Language Models Use Long Contexts" (arXiv:2307.03172)
- Chroma, "Context Rot: How Increasing Input Tokens Impacts LLM Performance" (14 Jul 2025)
- Model Context Protocol, introduction
- OWASP Top 10 for LLM Applications 2025